About Us

All about My Fun House Rentals









About Us

We are a local Richmond area Admusment supplier. Currently we can only service WEST of RT 95. Some of the counties we service include: Powhatan, Chesterfield, Henrico, Goochland, Amelia and Cumberland.

All of our inflatables are brand new this year.

Facts about our Bounce Houses:

Vinyl Material: All of MyFunHouse inflatables are made with high-strength 18.5 oz. vinyl. Although most bounce houses, inflatable slides and moonwalks these days are constructed with 18.5 oz vinyl, the base fabric of the vinyl is the key to tear resistance. Tear resistance is very important when considering the kind of stress an inflatable will endure through daily usage. Compare our (1300 x 1300 denier ) high strength base fabric to the competitions%u2019 (1000 x 1000 denier) As you can see, there is almost 70% more tread in the base fabric for the 1300 x 1300 denier vs. the 1000 x 1000 denier. This translates to a stronger and more tear resistant final product.
Baffle Material.

At MyFunHouse we only use baffle material that is 1300 x1300 denier. This provides the maximum strength for internal construction of every inflatable. Some of our competitors use 7 oz mesh or 800 x 800 denier baffle. Baffle is what keeps the inside of your inflatable intact. The stronger the baffle the tougher the inflatable seams.

All of MyFunHouse inflatables are double and quadruple stitched. We know double and quadruple stitching has become common in this industry, but how resistant is the thread used for those seams? Our seams are constructed with extra heavy weight, twisted, multi-filament, nylon thread. This can withstand a force of 35 lbs per inch before tearing, and 4 x 35 = 140 Lbs per inch. The tread we use for the manufacturing of every inflatable is heavily lubed. This lubrication prevents water from easily penetrating the tread.

Reinforcements: All inflatables have high stress points areas. These points may be entry areas, floor and uprights joints, or wherever structure panels meet. A quality inflatable will have strong reinforcements in these high stress point areas, that will ensure the unit stays together and lasts longer.

Anchors: Anchor points are keys to keeping the unit stable in up to a 20 mph winds. A tether, or an anchoring system, is only as strong as its weakest link. Our anchors are constructed of heavy duty vinyl. Two inch heavy duty D Rings are used in the anchor points. Some of our competitors use polyethylene webbing for anchor points. This polyethylene webbing could age and weather in a short period of time.

Inflation/Deflation: To keep the unit inflated it is critical that the inflation hose where the blower is connected have a perfect joint, so it won't come detached from the blower, when it is accidentally pulled around, when unit is in use. All of MyFunHouse units have a second blower tube, As inflatables get older they tend to lose more air between the seams, compared to when they are new. Down the road you will find the need for this second inflation tube.

Preventing sudden unexpected deflation is very important when it comes to inflatable safety. In the case of a blower failure, the unit should remain inflated long enough time to allow participants to exit safely from the inflatable. All of MyFunHouse units have air flaps that prevent air from blowing out of the unit in the event of blower failure.

For normal deflation, a good quality inflatable should have deflation zippers that have a Velcro sealed flap covers.

Removable Covers: fter many years of use, high-volume traffic areas, like steps and sliding and climbing areas of an inflatable, are the first places that require replacement. All of MyFunHouse units are made with removable and replaceable covers made here in the USA! If you purchase an inflatable from a Chinese manufacturer, when it comes to replacing the covers, you could be in for a big surprise. Many Chinese manufactures do not sell replacement covers.

Safety

Finger-Safe Inflatables: Some manufacturers use 1" or 2" netting for bounce house windows and netting for basketball hoops. Children playing inside inflatables can catch their fingers or their teeth on this netting, causing serious injury. At MyFunHouse, we use 1/8%u201D mesh for construction on all windows and basketball hoops. The mesh is still transparent enough to allow for easy supervision of children.

Safety Doors: Our self closing Velcro flap on the entrance of every bounce house and combo unit prevents children from possibly falling out of a bounce house, and gives easy access for supervision to enter the inflatable.

Safety Signs: MyFunHouse, has safety signs on every inflatable. Safety signs ensure that all riders are aware of the safety and operation rules. These signs protect you and your jumpers.

Lead Content: Lead has come under a great deal of scrutiny from the Federal Consumer Product Safety Commission (CPSC) as a hazard in the home, and as a component in vinyl. MyFunHouse rents vinyl that is lead free (under 100 part per million). Our vinyl material is tested in a certified CPSC lab. Certificates of compliance are available for all of our customers and can be sent to you upon request.

With all of the recent news headlines regarding Chinese products with high chemical contents, can you trust a Chinese manufacturer to use vinyl material for your inflatable that does not contain lead?